TWRP and Root

How To Install TWRP Custom Recovery And Root Galaxy J3 Pro SM-J330X

Samsung Galaxy J3 Pro users now can download and install the latest TWRP recovery and root Galaxy J3 Pro SM-J330X smartphone. If you are the owner of Samsung Galaxy J3 Pro SM-J330X smartphone and want root and install TWRP custom recovery, then you are in the right place.

The Samsung Galaxy J3 Pro comes with 5.0 inches Super AMOLED touch screen display. The device is powered by 1.2 GHz Quad-core processor along with 2 GB of RAM and 16 GB of internal storage which is Expandable Up to 128 GB. The Galaxy J3 Pro has an 8 MP primary camera and 5 MP camera in front. So if you wish to customize your device beyond the limits, then your primary concern is installing TWRP custom recovery and root Galaxy J3 Pro. The TWRP is an open-source custom recovery; it is the most popular custom recovery in the Android market.

Here in this article, we share a step by step guide on how to download and install the TWRP custom recovery and root Galaxy J3 Pro. The Samsung Galaxy J3 Pro is one of the best and mid-range devices in the J series.

The TWRP custom recovery is always better for the customization of Android Phones. After installing the TWRP custom recovery, you will be able to flash Custom ROMs, Custom Files, Customs Module, create and restore Nandroid backup of your phone and much more. Rooting is a process though that you can unlock or break all the restrictions of your device. After rooting, you get the superuser access to your phone. To install TWRP custom recovery and root Galaxy J3 Pro, your device should have an unlocked bootloader first.

Before proceeding, take the full backup of your phone data. Because while flashing TWRP and rooting your phone, entire data will be wiped clean. If you wish to download and install TWRP custom recovery and root Galaxy J3 Pro, then go ahead and follow the given instructions.

root Galaxy J3 Pro
root Galaxy J3 Pro


This guide containing the root package and instructions are working only with the Galaxy J3 Pro. Check the model number of your phone if it is Galaxy J3 Pro then go ahead, otherwise not.


AndroidBlog will not be held responsible for any damage that occurred to your Galaxy J3 Pro during or after the rooting process. Proceed at your risk.


  • It is highly recommended to make a proper backup of your contacts, messages, photos, videos, and other valuable data on your phone.
  • The battery level of your phone should be at least up to 70% to avoid unexpected shutdowns while rooting.
  • Enable USB Debugging on your phone by navigating to Settings > Developer Options.
  • Download and install Samsung USB Drivers on your PC.

Required Files:

Steps to Root and Install TWRP Recovery on Galaxy J3 Pro:

1: – First, download the TWRP Package, Odin tool (Odin v3.10.7) and SuperSU ( files on the desktop of your PC for Galaxy J3 Pro.

2: – Copy/paste the SuperSU file to the internal storage of your device.

3: – Extract the TWRP file to get the file with .tar extension and Odin flashing tool also to get the Odin3_v3.10.7.exe file.

4: – Switch off the Galaxy J3 Pro to boot into the Download Mode.

5: – Switch on the device while pressing and holding Volume UP + Home + Power buttons at the same time. Once a warning screen with a yellow triangle sign appears, press the Volume Up button to enter into Download Mode.

6: – Run Odin as administrator on the PC.

7: – Connect the phone using its USB data cable with the PC.

8: – Once the Galaxy J3 Pro is connected successfully to the PC, the ID: COM port will turn Blue on Odin, and you’ll see “Added!!” message.

9: – Click on the AP button in Odin and locate the firmware file that you have already extracted. Select it.

10: – Ensure that the Auto Reboot and F. Reset Time options are checked, and the Re-Partition option should be unchecked.

11: – Begin the TWRP installation by clicking on the Start button in Odin. This process may take a few minutes.

12: – A PASS! The message will be displayed on Odin after the TWRP installed successfully and the device will restart.

13: – Disconnect the device and turn it OFF to boot into TWRP recovery mode.

14: – Turn ON the phone by pressing and holding the Volume Up + Home + Power buttons altogether to boot into the TWRP recovery.

15: – Tap the Install button in TWRP and select the –

16: – After the installation completes successfully, reboot the system.

Done! You have successfully Install TWRP Recovery and Rooted your Galaxy J3 Pro via Odin.

How to Root Galaxy J3 Pro:

You can use a supported TWRP Recovery or any rooting apps to root your smartphone. If you are using rooting apps, then you can root Samsung Galaxy J3 Pro without a PC. As we have installed a supported TWRP Recovery on Galaxy J3 Pro, then we’ll flash the superSU to root Galaxy J3 Pro. Follow the given guide to root Galaxy J3 Pro using SuperSu.

Root Galaxy J3 Pro With Magisk

Let us know in the comments area below if you have any issues or questions regarding the above-given guide to install TWRP recovery on Galaxy J3 Pro and root it.

Bhatti Junaid

He continuously writes tech articles and development code. Also, appreciates excellent food, exceptional coffee and great company. He has written 266 guides and other posts.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button