OnePlus 5 and 5T have started receiving the latest February 2020 security patch. Recently OnePlus started rolling out the OxygenOS 9.0.11 for OnePlus 5 and 5T official update. The most recent update is rolling out via OTA and comes with the latest February 2020 security patch. OnePlus has still not released the Android 10 official update for these both three years old devices. But the Chinese company timely released the security update for OnePlus 5 and 5T. So this is just a security update which brings some improvements, bug fixes, many customizations and much more.
Now you can download and install OxygenOS 9.0.11 for OnePlus 5 and 5T February 2020 security official update. The OxygenOS 9.0.11 update comes with opting for a generic, system stability, added some new features, many bug fixes and so on. Once you install this latest security update, your device will run smoothly, increase system stability, battery timing and much more. Here in this article, we come with a simple step by step guide on how to download and install OxygenOS 9.0.11 for OnePlus 5 and 5T February 2020 security official update.
OnePlus is rolling out the OxygenOS 9.0.11 update via OTA (over-the-air), so it may take some time to reach in all regions. But if you are not in that region where the update is available then no need to worry, you can install it manually by following the given below guide. Given below we share the direct link of the OTA update file, through that you can download and install it on your device.
We are always strongly recommend you keeping updated your Android devices to the latest official updates and security patches. If you want to download and install the OxygenOS 9.0.11 for OnePlus 5 and 5T February 2020 security official update, then go ahead and follow the given instructions.
Note:
This guide containing the rooted and cleaned Oxygen OS 9.0.11 stable Update can be used for the OnePlus 5 / 5T devices only. Do not try to install this firmware on any other device or incorrect variant. It is recommended to check the model number of your device first.
Warning:
Pre-Requirements:
- Create a proper backup of all your existing data and settings on the phone before proceeding to the installation guide using a recommended custom recovery.
- Enable USB Debugging Mode on the OnePlus 5 / 5T by navigating to Settings > Developer Options.
- Verify that you’ve correctly installed the OnePlus 5 / 5T USB Drivers on the PC.
- Your device should be rooted with the latest version of a custom recovery like CWM or TWRP installed.
- The bootloader of your OnePlus 5 / 5T must be unlocked.
- Make sure that the battery level of the device is above 80% before going ahead.
Required Files:
-
OnePlus 5
OnePlus 5T
How to Install OxygenOS 9.0.11 For OnePlus 5 / 5T Official Firmware:
Step 1:- Download the latest OxygenOS 9.0.11 full stock firmware zip file from the above-given link directly on the phone or on your PC (according to your model).
Step 2:- Now, transfer/move the ROM file to the root folder of internal storage on your device.
Step 3:- Navigate to the device’s Settings Menu > System updates > tap on the top right settings icon > select Local Upgrade option.
Step 4:- Choose the Local Upgrade option to open the device storage. Browse for the package file.
Step 5:- Next, tap on the firmware file and select the Install option.
Step 6:- Once the installation process completes, your device will reboot into a new system. Wait for a few minutes.
Done! These were the complete steps to install Oxygen OS 9.0.11 for OnePlus 5 / 5T February 2020 security update.
If you’ve any queries, feel free to ask in the comments area below.
Source: XDA
