Huawei Flash Tools IDT 2.0 | Unbrick Huawei devices

In this guide, we will show you how to unbrick Huawei devices using the Huawei Flash Tools IDT 2.0. Talking about customization, the extent of it is pretty much decided by the underlying chipset in a device. While many of the devices come with either Snapdragon or MediaTek chipsets, some also opt for Samsung’s Exynos chipsets. But when we look at the Huawei devices, they have a different say on how things go. They have their proprietary Kirin chipsets powering up their devices. Does this exclude the Huawei devices from the domain of customization? No it does not. Huawei devices are also active players in the field of customization.

There is a large collection of custom binaries, mods and tweaks available for a large number of Huawei devices. Even though the bootloader stands as an obstacle, unlocking it makes it possible to carry out a number of customizations on the devices. From installing a custom recovery such as TWRP to rooting your device using Magisk there is no limit to the possibilities. But all of these customizations come with a risk.

While carrying out any of these tasks mentioned above, there is huge risk of getting your device in a bootloop and that can even happen from a slight mistake in the flashing process of a file or flashing an outdated custom binary. Along with that, there is also the danger of getting your device bricked. But if you find yourself in this situation, there is a way around this problem. You can easily unbrick your Huawei device using the Huawei Flash Tools IDT 2.0. This guide will be looking just over that so without any further delay, let’s get into it.

Huawei Flash Tool IDT 2.0

Huawei Flash Tools IDT 2.0 | Unbrick Your Huawei Devices

Before we get into the process, there is an important point you must be aware of. Devices running with Qualcomm chipsets come with the EDL mode. This mode allows flashing tools and other software to properly communicate with the bricked phones. Unfortunately, there is no mode such as this type for Kirin devices. So in this situation, you have to make use of the Test Point method for your Huawei device. Now head over to the section below to see the requirements for the process to unbrick your Huawei device using the Huawei Flash Tools IDT 2.0.

STEP 1: Backup Data (if Possible)

This process will wipe all of the data from your phone. So if you can, you should try to take a backup of your device. As your device is probably bricked, there is no proper method to take a backup. But if you have a trick or two up your sleeve, such as a third party tool or something else then you should use it to take a backup of your Huawei device.

STEP 2: Charge your Device

You will not be able to know your device’s actual battery percentage because your device is bricked. So just to be on the safe side, you should charge your phone before you start the process. Charge it for at least an hour so that it does not turn off with the process under way.

STEP 3: Install Huawei USB Drivers

Next up, you are required to download and configure Huawei USB drivers on your PC so that your PC can identify your device and they can work with synchronicity.

STEP 4: Download Huawei Flash Tools IDT 2.0

Now you have to download the Huawei Flash Tools IDT 2.0 on your computer. This tool is developed by HiSilicon and enables you to install XML image files on devices running on Kirin chipsets. With the help of this tool you can unbrick your Huawei device and bring it back to normal working condition.

STEP 5: Download Huawei XML Firmware File

Now you are required to download the stock firmware for your device in the format of an XML image. It is integral that you check that the stock firmware file is in XML format because the Huawei Flash Tools IDT 2.0 can only work with XML files. If you use any other file format for your stock firmware, the tool will not be able to work with it. Check out our section on Huawei devices to look out for Stock firmware for Huawei devices. If you are not able to find one, then you should search for it on the internet. Make sure that you download the firmware from a trusted site.

STEP 6: Unbrick Device using Huawei Flash Tools IDT 2.0

STEP 1: First of all, you need to extract the contents of the Huawei Flash Tools IDT 2.0 file that you downloaded to any convenient spot on your PC.

STEP 2: After that, head over to the extracted folder and look for the IDT file. Once you find it, right click on the file and run as Administrator.

STEP 3: With this, the IDT tools will be launched. On the top menu bar that appears, click on the Tools icon.

Huawei Flash Tools IDT 2.0 | Unbrick Huawei devices 1

STEP 4: This will open up the Download settings dialog box. There you need to click on the Browse button next to Image XML file.

Huawei Flash Tools IDT 2.0 | Unbrick Huawei devices 2

STEP 5: In this step, you need to navigate to the XML file that you downloaded for your Huawei phone, select it and then click on open.

STEP 6: Now you have to connect your Huawei device to your computer and then short pinout it for the Test Point method. With this, your computer will be able to identify your device.

STEP 7: Then from the USB port, you are required to select the correct ROM port that you have connected your device to.

STEP 8: In case that the IDT tool is not able to identify your device, then try connecting your device to another ROM port and then change it accordingly in the USB port.

STEP 9: Finally, you can click on the Start button located on the top menu of the IDT tool’s interface. Apart from that, you could go to the operation menu and then select start from there.

Huawei Flash Tools IDT 2.0 | Unbrick Huawei devices 3

STEP 10: With this, the flashing process will be initiated. The process may take a few minutes. Once it is completed, you will be notified.

STEP 11: Once you get the notification that the process is completed, you can disconnect your Huawei device from your PC. Then if it does not do itself, then boot it to OS. And with that, the process is completed!

So on this note, we conclude our guide on how to unbrick your Huawei device using Huawei Flash Tools IDT 2.0. We hope that you found this guide helpful. If you faced any difficulties, feel free to post them in the comment section below.

Uzair Hussain

Uzair Hussain is a dedicated writer who loves to read and research about android phones and technology. Has always enjoyed exploring further into tech and likes to share his knowledge through publishing writings.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button