In this article, you will get to know how to unbrick OnePlus 7T Pro and all the ways to fix it. You will be guided stepwise procedure of restoring the OnePlus 7T Pro and restoring it back to stock ROM from dead. Bricked phones are of no use, you are at the right place for finding a way to fix them rightly.
Bricking An Android Phone?
Due to any sort of hardware issues, misconfiguration or corrupt firmware a device does not boot, at this state, a device is termed as a bricked device or unbootable device. There are two types of bricking explained below.
The soft brick is a half-dead state of a phone. It is a state in which a device has some sort of freezing issues or the device stuck into a boot loop or while flashing some custom ROM etc.
A device that does not show any sign of life and which is unbootable is called hard bricked device. It is also termed as a fully dead device. This state accurses after forcefully executing firmware code which is definitely not meant for the device or it can also happen after some hardware faults in a device.
OnePlus 7T Pro Specifications: Overview
The OnePlus 7T Pro has a massive 6.67-inch display with the features of 1440 x 3120-pixel resolution. It is offered 516ppi pixels density, 19.5:9 aspect ratio with 90hz fresh rate, HDR10+, and 88.1% screen to body ratio from THE FLUID AMOLED. Corning Gorilla Glass is housed in it to protect its display from any sort of frequent falls.
OnePlus 7T Pro comes with a tremendous camera department with a triple camera module featuring a 48-megapixel primary sensor, a 16-megapixel ultra-wide sensor and with an 8-megapixel telephoto lens. There is also a pop-up selfie camera of 16 megapixels with auto-HDR and gyro-EIS. There is also a fingerprint sensor that is under display, accelerometer, proximity, gyro, and compass. It also contains 30w fast warp charge technology’s 4085mAH LI-PO non-removable battery.
It also has WI-FI 802.11 a/b/g/n/ac, GPS, A-GPS, Bluetooth, USB, NFC, GLONASS, etc.
Steps To Unbrick OnePlus 7T Pro Using MSM Download Tool:
Step 1: First, you have to Power OFF the OnePlus 7T Pro, then you have to boot it into QUALCOMM EDL MODE and it can be happened by pressing and holding Power + Volume UP + Volume Down buttons together.
Step 2: Soon after you see EDL Mode, you have to release all the buttons.
Step 3: While OnePlus 7T Pro is in EDL Mode, you have to connect the device to your computer.
Step 4: Now you need to run the MSM TOOL.exe that you have downloaded earlier.
Step 5: Next, click on the target drop-down button and then select Indian if you are selecting Indian firmware.
Step 6: Click on the ENUM button to check if the device is connected or not. If you see the device is connected then click on the Start button to unbrick the OnePlus 7T Pro.
Step 7: After 5 to 6 minutes the phone will be fixed and the device will auto reboot in the system.
Step 8: Now the OnePlus 7T Pro you have is unbricked and workable. Enjoy!
So here you go with a complete guide on how to unbrick OnePlus 7T Pro using the MSM download tool, note that this method is only applicable for OnePlus 7T Pro.
Let us know in the comments area below if you have any issues or questions regarding the above-detailed guide.