Update Guides

Download G532MUMU1ARIC August 2018 Security Patch for Galaxy J2 Prime

You can now download and install G532MUMU1ARIC Android 6.0.1 Marshmallow for Galaxy J2 Prime. Samsung has started rolling this new firmware update for the SM-G532M variant of Galaxy J2 Prime. The firmware come with August 2018 Android security patch. You’ll be glad to know that the latest update comes with many performance improvements to Galaxy J2 Prime SM-G532M. You can download G532MUMU1ARIC Android 6.0.1 Marshmallow firmware from below to update manually. You can navigate to OTA (Over-the-air) update system / Samsung KIES to upgrade your device to update your Galaxy J2 Prime. But if you have not yet received the OTA notification then follow the given guide.

Samsung announced Galaxy J2 Prime back in 2016 which is an entry-level hardware device. This phone comes with 5.0 inches PLS TFT capacitive touchscreen display with a screen resolution of 540 x 960 pixels. Galaxy J2 Prime has a MediaTek MT6737T Quad-core SoC and 1.5GB of RAM. Galaxy J2 Prime is available with 8GB internal memory. This phone features an 8MP rear camera and 5MP front shooting camera. The smartphone running on Android 6.0 Marshmallow out of the box and packed with a non-removable Li-Ion 2600 mAh battery.

Keep in mind that G532MUMU1ARIC is a completely unbranded firmware, thus you should not get any pre-installed apps or extra language packs with this. In this guide, we’ll use ODIN flashing tool to install Android 6.0.1 Marshmallow on Galaxy J2 Prime. So go ahead and follow the given step-by-step guide carefully. Don’t forget to take proper backup of all your important data before proceeding to install G532MUMU1ARIC Android 6.0.1 Marshmallow August 2018, Security Patch.

Download G532MUMU1ARIC August 2018 Security Patch


This guide containing the G532MUMU1ARIC Android 6.0.1 Marshmallow firmware and instructions are working with Galaxy J2 Prime only. Do not try to install this firmware on any other device or incorrect variant. Verify the model number of your device before proceeding to the installation guide.

G532MUMU1ARIC Android 6.0.1 Marshmallow Firmware Detail

  • Device Name: Galaxy J2 Prime
  • Model Number: SM-G532M
  • Baseband Version: G532MUMU1ARIC
  • Security Patch Level: 01.08.2018
  • Android OS: 6.0.1


AndroidBlog will not responsible for any kind of damage occurred to your Samsung Galaxy J2 Prime during or after the installation of Android 6.0.1 Marshmallow. Proceed at your own risk.


  • Make a proper backup of all the existing data and settings of your Galaxy J2 Prime, in case anything goes wrong then you’ll be able to restore your data back.
  • Verify that you’ve properly installed the Galaxy J2 Prime USB Drivers on the PC.
  • Enable USB Debugging Mode on your J7 by navigating to Settings > Developer Options > check the USB Debugging option.
  • If you have a custom ROM installed on the phone, then after the installation of the stock update it will be lost.
  • The custom recovery will be replaced by the stock version.
  • If the Galaxy J2 Prime is rooted then after installing the official firmware, it will no longer belong to a rooted version.
  • Make sure that the battery level of your phone is about 70% to avoid unexpected shutdowns while installing the ROM.

Download G532MUMU1ARIC Android 6.0.1 Marshmallow Firmware:

Steps: How To Update Galaxy J2 Prime SM-G532M via OTA

  1. Connect your device with a stable internet connection (Wi-Fi or data network).
  2. Navigate to Android app drawer and tap on Settings.
  3. Next, locate About Device and tap on it.
  4. Choose Software Update from About Device.
  5. Tap on Update option.
  6. If the update is available then you can see an update, press OK to download and install.
  7. Once the download completes, your device will reboot to complete the installation process.

Steps: How To Update Galaxy J2 Prime SM-G532M via Samsung Kies

    1. Ensure that you have a stable internet connection (WiFi) on your PC.
    2. Download and install Samsung Kies on your computer.
    3. Power ON the phone and then connect it to a PC using its USB cable.
  1. Run Samsung Kies and wait for it to detect your phone.
  2. If a new firmware is available then you will see that a new firmware upgrade is available at Samsung Kies home screen.
  3. Now, press the Firmware Upgrade button to proceed.
  4. Finally, follow the on-screen instruction and your device will run upgrade and reboot automatically. Disconnect your device from a PC after the process completes.

Update Galaxy J2 Prime to G532MUMU1ARIC Android 6.0.1 Marshmallow:

1:– First, download G532MUMU1ARIC Security Patch and Odin v3.09 for Galaxy J2 Prime on the desktop of your PC and extract the .zip files.

2:– Turn OFF your Galaxy J2 Prime in order to boot into Download Mode.

3:– Turn the device ON by pressing and holding the Volume Down + Home keys at the same time and then press the Power button until the construction Android robot and a triangle appear. Now press the Power button once again to confirm to enter into Download Mode.

4:– Launch Odin tool on your PC as an Administrator and plug your phone into your PC while your phone is in the Download Mode.

5:– One of the ID:COM boxes will turn yellow with the COM port number once the phone is connected successfully.

6:– Select the firmware files that you want to flash on your Galaxy J2 Prime. (Already extracted in Step No 1)

Click on ‘AP’ and select file with ‘AP’ in its name.

Click on ‘CP’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.

Click on ‘CSC’ and select file with ‘CSC’ in its name. Ignore this step if there is no such file.

Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.

Click on ‘BL’ and select file with ‘BL’ in it’s name. Ignore if there is no such file.

7:– In Odin, make sure that the Auto Reboot and F. Reset Time options are ticked but the Re-Partition option should be unchecked.

8:– Click on the Start button in Odin to initiate the installation process. It will take a few minutes to complete.

9:– Once the process of installation successfully completes, the Galaxy J2 Prime will restart. Unplug the phone after you see the home screen.

Fix Boot Loop Issue On Galaxy J2 Prime SM-G532M

In case your Galaxy J2 Prime SM-G532M stuck at booting for more than 10 minutes after the installation process then follow the given instructions:

  1. First, boot your device into Recovery Mode by pressing and holding the Volume Up + Home + Power buttons at the same time.
  2. Then perform Wipe data/Factory Reset and Wipe Cache Partition task. After that select Reboot System Now.

In recovery mode use Volume keys to navigate between options and Power key to select the option.

Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Done! these were the instructions to install G532MUMU1ARIC Android 6.0.1 Marshmallow on Galaxy J2 Prime. Let us know in the comments area below if you have any question or issues.

Aamir Jamal

An Android Geek and audiophile who love to read and write reviews/tutorials about gadgets and new tech stuff. He has written 1007 guides and other posts.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button